This device collects and sends information to a home router or through a main controller unit (when plugged in to any power home socket). The main controller unit holds the information about the time spent as switched on and switched off, real power consumption, alarm lighting, smart light switch-off if nobody is at home etc. “Zero  power consumption and small dimensions based on COB technology of chipset.

If you are a consumer, the main question for you would be this: how I can trust different manufacturers of LED lamps if they announce same characteristics of their product as power consumption, brightness in lumen, lifetime and switch cycles but offer variable prices, some being twice as more expensive.  Moreover, it is only possible to accurately measure those parameters in specially equipped labs.
 
In fact, when you change cheaper old high-power consumption vacuum bulbs to LED ones while  energy companies, such as British Gas or E-ON, change their tariffs each year (LED lifetime is 10 years), you cannot calculate your advantage or justify the need to change all of the cheap old style bulbs for expensive LED ones. It is important to consider a variety of elements, including but not limited to, how long LED lamps be used for in reality and how much money can be saved until the next replacement is required.

Elecomp Co. Ltd provides miniature LED lamp universal controller units based on M2M interface which have the following technical characteristics:

This device collects and sends information to a home router or through a main controller unit (when plugged in to any power home socket). The main controller unit holds the information about the time spent as switched on and switched off, real power consumption, alarm lighting, smart light switch-off if nobody is at home etc. On the picture you can see engineer samples under the testing.

Based on this regularly collected data, a smartphone, laptop, home computer or cloud server will prepare a monthly report for each customer or homeowner about possible savings on the household bills, history of each lamp (bulb), lifetime, when it is time to replace (not necessary to go to switch-on and off all bulbs to check). These controller units have unlimited application possibilities for households, offices and hotels, industry and telecom application. M2M controller units can be used with LED lamps that have already been installed by a special connector.

Elecomp Co. Ltd would like to provide hardware, software and complete devices for sale or installation.

A cheap and high-tech micro-controller unit with M2M interface can be applied and installed to the following: